The ultimate guide to use a pressure washer for motorcycle cleaning!

A pressure washer is a machine that uses water under very high pressure to remove dirt from surfaces such as driveways, sidewalks, or even motorcycles! A typical power washer can shoot a high-pressure stream of water up to 50ft in length. A pressure washer makes motorcycle cleaning much easier.

This allows you to clean from far away so you don’t have to get on your hands and knees scrubbing with a brush. The best part about using a pressure washer is that the dirty water gets forced through a filter then re-circulated into the tank instead of leaving behind brown/grey/dirty water like when you hose off by hand with a garden hose. wash filters do not allow particles to flow back into the water supply.

How to use a pressure washer on motorcycles:

The first step is to identify the areas of the motorcycle that need to be cleaned and be sure to cover any areas that you do not want to be sprayed with water. I like to start by spraying down the entire motorcycle with the general purpose nozzle to get most of the dirt and dust off. Once the motorcycle is wet, I’ll switch to a finer spray nozzle (such as the detail nozzle) and start cleaning specific areas. Be sure to keep the pressure washer moving at all times so you don’t end up with streaks or circles where the water was standing still for too long!

The best brands of pressure washers for motorcycle cleaning:

Pressure washers come in a variety of brands, styles and sizes. The best pressure washer for you will depend on your needs and what you want to use it for. There are a few popular brands that make high-quality motors that won’t break the bank such as Generac, AR Blue Clean. In addition to power output (PSI), I would always recommend getting a pressure washer with at least 3 modes of operation. This allows you to do more than just wash your motorcycle. Of course, most motorcycles don’t need 3000 psi since we can clean them by hand if we wanted! But having an adjustable nozzle is definitely helpful.

Pressure washer tips and tricks for the perfect wash:

Always start by spraying down the entire motorcycle with the general-purpose nozzle to get most of the dirt and dust off. Once the motorcycle is wet, I’ll switch to a finer spray nozzle (such as the detail nozzle) and start cleaning specific areas. Be sure to keep the pressure washer moving at all times so you don’t end up with streaks or circles where the water was standing still for too long!

Cleaning your motorcycle by hand is time-consuming and can be a pain.

Pressure washers are an easy way to clean your motorcycle without getting on your hands and knees scrubbing with a brush. The best part about using a pressure washer is that the dirty water gets forced through a filter then re-circulated into the tank instead of leaving behind brown/grey/dirty water like when you hose off by hand with a garden hose. wash filters do not allow particles to flow back into the water supply.

A pressure washer is an easy way to clean your motorcycle without getting on your hands and knees scrubbing with a brush, but it can also be used for other tasks around the house and yard. Be sure to read the manufacturer’s instructions carefully to make sure you’re using them safely and effectively.

Final thoughts

A pressure washer is a great tool to have in your arsenal for motorcycle cleaning, but it can also be used for a variety of other tasks around the house and yard. Be sure to read the manufacturer’s instructions carefully to make sure you’re using it safely and effectively.

Adam
Adam believes that you can have anything you want in life, if you are willing to work for it. He has worked hard for everything he has, and is grateful for every opportunity that comes his way. Adam is a veteran of the United States Marine Corps and proudly served his country. He is currently the owner of two businesses, and is always looking for new opportunities to help others achieve their goals.

Latest Posts